CCalclabhub

Math · 61 calculations

Geometry

How To Calculate The Volume Of A Hemisphere

A hemisphere is exactly half a sphere, cut through its centre, and its volume is two-thirds of pi times the radius cubed. This page explains where that formula comes from, how it differs from the sphere and from the surface-area formulas, and how doubling the radius changes the answer, with three worked examples.

Last updated

Quick Answer

V = (2/3) × π × r³

r
The radius of the hemisphere, measured from the centre of the flat base to the top of the dome
V
The volume enclosed by the curved surface and the flat base, in cubic units
π
The constant pi, approximately 3.141592653589793

Cube the radius, multiply by pi and by two-thirds. For a radius of 6 the cube is 216 and the volume is 452.3893421169302 cubic units. The curved surface alone is 2πr², or 226.1946710584651, while the total surface including the flat circular base is 3πr², or 339.29200658769764. The great circle at the base has area πr², about 113.09733552923255.

What Is The Volume Of A Hemisphere?

A hemisphere is one half of a sphere, obtained by slicing a sphere through its centre. The cut face is a circle of the same radius as the sphere, known as a great circle, and it forms the flat base of the solid. Bowls, domes and the northern and southern halves of a planet are everyday hemispheres. Because it is precisely half of a symmetric sphere, every measurement of a hemisphere follows directly from the corresponding measurement of a full sphere. The word itself comes from the Greek for half and ball, and it carries the same meaning in geometry, astronomy and architecture. Unlike a sphere cut by a plane away from its centre, the cut here always passes through the middle, which guarantees the two resulting pieces are identical in size and shape.

The volume of a full sphere is four-thirds of pi times the radius cubed, so a hemisphere, being exactly half of it, has a volume of two-thirds of pi times the radius cubed. The factor of two-thirds is the whole formula; the rest is arithmetic. For a radius of 6 the radius cubed is 216, and two-thirds of pi times 216 comes to 452.3893421169302 cubic units. There is no separate correction for the flat face, because volume depends only on the space enclosed, not on how many surfaces enclose it.

The halving argument works because a plane passing through the centre of a sphere divides it into two congruent pieces. Any plane away from the centre would still cut the sphere into two pieces, but they would not be equal and neither would be a hemisphere. This is why the radius of the hemisphere is the same as the radius of its parent sphere: the base circle passes through the centre, so its edge is exactly one radius from the centre in every direction.

Surface area needs more care, because a hemisphere has two kinds of surface. The curved dome is half of the sphere's curved area, which is four pi r squared, so the curved surface is two pi r squared. For radius 6 that is 226.1946710584651 square units. This quantity ignores the flat circular base entirely and is the right figure when you are coating only the outside of a dome or painting the outside of a bowl.

The total surface area adds the flat base back in. That base is a great circle with area pi r squared, about 113.09733552923255 for radius 6, so the total is two pi r squared plus pi r squared, which simplifies to three pi r squared, or 339.29200658769764 square units. The distinction between curved and total area is a frequent trap: a solid hemisphere really does have that extra flat disk, and leaving it out understates the material needed to enclose the shape.

Volume scales with the cube of the radius, while every area scales with its square. Doubling the radius therefore multiplies the volume by eight, since two cubed is eight, but multiplies the surface areas by only four. Starting from radius 6, doubling to radius 12 takes the volume from about 452.39 to about 3619.11 cubic units, a factor of eight, while the curved area merely quadruples. This is why large tanks and domes hold disproportionately more than their surface suggests.

Because the radius is cubed, getting it right matters more than in almost any other geometry problem. The radius is the distance from the centre of the flat base to the top of the dome, which is half the diameter of the parent sphere. Entering a diameter directly as if it were a radius multiplies the volume by eight, since the diameter is twice the radius. Measure across the base first, halve that distance, and only then cube it.

The formula is useful wherever a half-sphere appears. Water tanks with domed lids, igloos, architectural domes and the bowl of a mixing vessel are all approximated by hemispheres, and knowing the volume tells you capacity while knowing the surface tells you material or coating cost. Astronomers speak of the northern and southern hemispheres of a planet, and the same geometry governs how the surface area of each half is computed from the planet's radius. Engineers use the same relationship when estimating how much rain a domed roof must shed or how much paint a curved ceiling needs. In every one of these cases the radius is the single input that controls all the other quantities, which is why measuring it accurately matters more than any other detail in the whole calculation.

The result assumes a mathematically perfect hemisphere and matching units throughout. Real domes have wall thickness, flattened tops or openings, and a bowl holds less than its geometric volume once the rim is accounted for. Volume is reported in cubic units and surface area in square units, so the two can never be interchanged. When a problem quotes a diameter, a circumference or a surface area instead of a radius, convert to the radius first, then apply the formulas on this page.

Formula

V = (2/3) × π × r³

Formula page →

Half of the sphere volume, four-thirds pi r cubed. Cube the radius first, then multiply by pi and by two-thirds. With radius 6 this gives 452.3893421169302 cubic units.

SymbolMeaning
VVolume of the hemisphere
rRadius
πPi

A_curved = 2 × π × r²

Formula page →

Exactly half of a sphere's curved area, four pi r squared. It covers only the dome and deliberately excludes the flat base, which is why it is smaller than the total surface area.

SymbolMeaning
A_curvedCurved surface area
rRadius

A_total = 3 × π × r², with A_base = π × r²

Formula page →

The total surface adds the flat circular base of area pi r squared to the curved area of two pi r squared. For radius 6 the base is 113.09733552923255 and the total surface is 339.29200658769764 square units.

SymbolMeaning
A_totalTotal surface area
A_baseGreat circle area
rRadius

How To Calculate The Volume Of A Hemisphere

  1. 1

    Find the radius of the hemisphere

    Take the distance from the centre of the flat base to the top of the dome. If the problem gives a diameter, halve it, because using the diameter in place of the radius would multiply the volume by eight. In the worked example the radius is 6 and the corresponding square is 36 and cube is 216.

  2. 2

    Cube the radius for the volume

    Compute r cubed by multiplying the radius by itself twice. For radius 6 that is 6 times 6 times 6, equal to 216. This cubing is the reason volume responds so strongly to the radius, and it is the step most often skipped by people who square instead.

  3. 3

    Apply the two-thirds factor

    Multiply the cube by pi and then by two-thirds, giving two pi r cubed over three. With a cube of 216 this is two times pi times 216 divided by 3, which evaluates to 452.3893421169302 cubic units. Multiplying by the fraction last keeps the arithmetic easy to follow.

  4. 4

    Work out the curved and base areas

    For surface area, square the radius to get 36. The curved dome is two pi times 36, or 226.1946710584651, and the flat great-circle base is pi times 36, or 113.09733552923255. These are square units, not cubic units, and the base area is exactly one third of the curved area.

  5. 5

    Add the base for the total surface area

    Sum the curved area and the flat base, which simplifies to three pi r squared. For radius 6 the total is 339.29200658769764 square units. Remember that this total is only relevant to a closed solid; an open bowl that has no material across its mouth still has that flat disk as its bottom.

Examples

Example 1: The default hemisphere: radius 6

radius
6
StepCalculationResult
Radiusr = 66
Radius cubed6 × 6 × 6216
Radius squared6 × 636
Great-circle areaπ × 36113.09733552923255
Curved surface area2 × π × 36226.1946710584651
Total surface area3 × π × 36339.29200658769764
Volume2 × π × 216 ÷ 3452.3893421169302

Result: For radius 6 the volume is 452.3893421169302 cubic units, the curved surface is 226.1946710584651, the great-circle area is 113.09733552923255 and the total surface is 339.29200658769764 square units.

Example 2: A small hemisphere: radius 3

radius
3
StepCalculationResult
Radiusr = 33
Radius cubed3 × 3 × 327
Radius squared3 × 39
Curved surface area2 × π × 956.548667764616276
Total surface area3 × π × 984.82300164692441
Volume2 × π × 27 ÷ 356.548667764616276

Result: A hemisphere of radius 3 has a volume of 56.548667764616276 cubic units, a curved surface of 56.548667764616276 and a total surface of 84.82300164692441 square units.

Example 3: Doubling the radius: 6 to 12

radius
12
StepCalculationResult
Radiusr = 1212
Radius cubed12 × 12 × 121728
Volume2 × π × 1728 ÷ 33619.1147369354417
Multiple of the original volume3619.1147369354417 ÷ 452.38934211693028

Result: Doubling the radius to 12 gives a volume of 3619.1147369354417 cubic units, which is 8 times the original 452.3893421169302, exactly as the cube of the radius predicts.

Calculator

Volume

452.3893

Curved surface area
226.1947
Total surface area
339.292
Great-circle area
113.0973

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the The Volume Of A Hemisphere calculator page.

Common Mistakes

  • Using four-thirds pi r cubed instead of two-thirds

    Four-thirds pi r cubed is the volume of a whole sphere. A hemisphere is half of that, so the factor must be two-thirds. Using the sphere formula doubles the correct answer and is easy to miss because the rest of the expression looks identical.

  • Entering the diameter as the radius

    The radius is half the distance across the base. Substituting a diameter directly cubes the wrong length and multiplies the volume by eight, since two cubed is eight. Always halve a quoted diameter before doing anything else.

  • Squaring the radius for the volume

    Volume needs the radius cubed; only area uses the square. Squaring radius 6 gives 36 where the volume calculation needs 216, producing a result far too small. Keep the cube and the square clearly separated in your working.

  • Leaving out the flat base from total surface area

    The curved dome is two pi r squared, but a closed hemisphere also has a circular base of pi r squared. Reporting 226.1946710584651 as the total surface for radius 6 omits that base and understates the true total of 339.29200658769764.

  • Assuming volume scales linearly with radius

    Volume grows with the cube of the radius, so doubling the radius multiplies it by eight, not by two. A quick mental check on any answer is that a larger radius should produce a much larger volume than the same proportional increase in surface area.

  • Mixing cubic and square units

    Volume is measured in cubic units and surface area in square units. A figure of 452.3893421169302 square units is a category error, because that number is a volume. Label every result with the correct unit before comparing or reporting it.

FAQ

How does the volume of a hemisphere relate to that of a sphere?

It is exactly half. A sphere has a volume of four-thirds pi r cubed, so a hemisphere has two-thirds pi r cubed. The flat cut passes through the centre and divides the sphere into two congruent halves.

What is the difference between curved and total surface area?

Curved surface area covers only the dome and equals two pi r squared. Total surface area also includes the flat circular base of area pi r squared, giving three pi r squared in all. Which one you need depends on whether the base is part of the object.

What happens to the volume when the radius doubles?

It increases eightfold, because volume depends on the cube of the radius and two cubed is eight. Surface area only quadruples, since it depends on the square. For radius 6 to 12 the volume goes from about 452.39 to about 3619.11.

What is a great circle and why does it matter here?

A great circle is the circle formed where a plane through the centre of a sphere cuts its surface. For a hemisphere it is the flat base, with area pi r squared and the same radius as the dome. It is the largest circle that fits on the sphere.

Can I use the diameter in the formula?

Not directly. The formulas all use the radius, which is half the diameter. Substituting a diameter would cube a length twice too large and give eight times the correct volume, so divide the diameter by two first.

Why is the volume in cubic units while the surface is in square units?

Volume measures three-dimensional space and is built from the radius cubed, so it carries cubic units. Surface area measures a two-dimensional covering and uses the radius squared, so it carries square units. The two quantities are not interchangeable.

References

  1. [1]Wikipedia, Hemisphere — https://en.wikipedia.org/wiki/Hemisphere
  2. [2]Wikipedia, Sphere — https://en.wikipedia.org/wiki/Sphere
  3. [3]Wikipedia, Volume — https://en.wikipedia.org/wiki/Volume