CCalclabhub

Science · 51 calculators

Acceleration Calculator

Acceleration is how quickly velocity changes. One subtraction and one division turn a starting speed, an ending speed and a time into the rate at which the motion is changing.

Last updated

Acceleration

4

Change in velocity
20
Distance travelled
50
Net force required
4,800

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

a = (v - u) / t

a
Acceleration, the rate at which velocity changes
u
Starting velocity, in metres per second
v
Final velocity, in metres per second
t
Time taken, in seconds
m
Mass, used only when you want the force involved

How to check the result by hand

  1. 1

    Write down both velocities in the same unit

    Convert anything in kilometres per hour to metres per second first, by dividing by 3.6. A single mixed unit turns the answer into nonsense that still looks plausible.

  2. 2

    Subtract the starting velocity from the final one

    For a car going from rest to 20 metres per second that is 20 minus 0, which is 20. If it were braking from 30 to a stop the answer would be -30, and the minus sign is the whole point.

  3. 3

    Divide by the time taken

    Twenty metres per second of change spread over 5 seconds is 4 metres per second squared. Doubling the time halves the acceleration for the same change in speed.

  4. 4

    Take the average speed if you need the distance

    Add the two velocities and halve them. Ten metres per second average over 5 seconds covers 50 metres. This midpoint rule only holds when the acceleration is steady.

  5. 5

    Multiply by mass for the force

    A 1200 kilogram car accelerating at 4 metres per second squared needs 4800 newtons. Remember that this is the net force, so the engine has to deliver more than this to also beat friction and drag.

Common Questions

How does the Acceleration Calculator work?

Subtract the starting velocity from the final velocity, then divide by the time taken. From rest to 20 metres per second in 5 seconds the acceleration is 4 metres per second squared, the average speed is 10 metres per second, the distance covered is 50 metres, and a 1200 kilogram car needs a force of 4800 newtons.

What do I need to enter in the Acceleration Calculator?

It takes 4 inputs: Starting velocity, Final velocity, Time taken, Mass. Fields that expect a unit say so next to the label.

Where does Acceleration come from?

It comes from a = (v - u) / t — the change in velocity divided by the time over which it happened. The sign of the answer carries the direction.

What is the most common mistake with the Acceleration Calculator?

Mixing metres per second with kilometres per hour. The formula needs both velocities in the same unit, and the time in seconds. Leaving one velocity in kilometres per hour and the other in metres per second produces an answer that is off by a factor of 3.6 and still looks like a number.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Acceleration page.