CCalclabhub

Everyday Life · 57 calculators

Drywall Needed Calculator

Drywall is sold in whole sheets, so the job is to add up every surface, take off the openings, divide by the sheet area and round up with a waste allowance.

Last updated

Sheets needed

21

Wall area
448
Ceiling area
192
Total surface
640
Area after openings
598
Sheets before waste
19

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

sheets = ceil((wall area + ceiling area - openings) / sheet area x (1 + waste))

wall area
Perimeter times the wall height
ceiling area
Length times width of the room
sheet area
32, 40 or 48 square feet depending on the sheet length
waste
Extra allowance for cuts around openings and corners

How to check the result by hand

  1. 1

    Work out the wall area from the perimeter

    The perimeter of a 16 by 12 foot room is 56 feet. At a height of 8 feet that is 448 square feet of wall.

  2. 2

    Add the ceiling

    The ceiling is 16 by 12, which is 192 square feet. Include it only if you are boarding the ceiling as well as the walls.

  3. 3

    Subtract the openings

    Two windows and a door remove 42 square feet, leaving 598 square feet of surface that actually needs boarding.

  4. 4

    Divide by the sheet area and add waste

    598 over 32 is 18.6875 sheets, and ten percent waste takes that to 20.5563, so 21 sheets of 4 by 8 go on the order.

Common Questions

How does the Drywall Needed Calculator work?

A 16 by 12 foot room has 448 square feet of wall and 192 of ceiling. Take off 42 square feet of openings and 598 square feet remain, which is 21 sheets of 4 by 8 once 10 percent waste is added.

What do I need to enter in the Drywall Needed Calculator?

It takes 7 inputs: Room length, Room width, Wall height, Sheet size, Include the ceiling, Openings, Waste allowance (percent). Fields that expect a unit say so next to the label.

Where does Sheets needed come from?

It comes from wall area = 2 x (length + width) x height — the four walls unwrapped into one long rectangle.

What is the most common mistake with the Drywall Needed Calculator?

Forgetting the ceiling. The ceiling is often the largest single surface in a room. Leaving it out of a 16 by 12 room under orders by six sheets.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Drywall Needed page.