Everyday Life · 57 calculators
Electricity Cost Calculator
Electricity cost is power multiplied by time, converted into the unit the bill actually uses, then priced. Almost every wrong answer comes from confusing the two quantities — watts and kilowatt-hours — before any arithmetic begins.
Last updated
Cost per day
1.26
- Energy used per day
- 4.5
- Cost per hour of use
- 0.42
- Cost over a 30-day month
- 37.8
- Cost over a year
- 459.9
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Cost = watts x hours / 1000 x rate per kWh
- W
- Power rating in watts — the rate energy is used, taken from the label
- h
- Hours of use — how long the appliance actually runs, not how long it is plugged in
- rate
- Price per kilowatt-hour — total charge divided by total kWh
- kWh
- Energy consumed — watts times hours divided by 1000, the quantity the bill charges for
How to check the result by hand
- 1
Find the power rating in watts
The label on the appliance states its power, usually in watts or kilowatts. Convert kilowatts to watts by multiplying by 1000, so a 1.5 kW heater becomes 1500 W. If the label gives only current and voltage, multiply them together, since power equals volts times amps.
- 2
Estimate the hours of actual use per day
This is how long the appliance runs, not how long it is plugged in. A fridge's compressor might run eight hours in twenty-four rather than the full day, and a heater runs only while the room is cold. Guessing high here inflates every figure that follows, so it is worth watching the appliance for a day.
- 3
Convert watts and hours into kilowatt-hours
Multiply the wattage by the hours and divide by 1000. For 1500 W over three hours that is 4.5 kWh. Omitting the division by 1000 is the single most common slip, and it inflates the result a thousandfold while still looking like an ordinary number.
- 4
Recover the price per kilowatt-hour from the bill
Divide the total charge by the total kWh for the same period. A bill of 84 for 300 kWh yields 0.28 per kWh, tax and standing charges included. Using the all-in effective rate keeps the estimate comparable with what you actually pay.
- 5
Multiply energy by rate, then scale to the period you want
4.5 kWh at 0.28 is 1.26 a day. Scale that daily figure to 37.8 for a thirty-day month and 459.9 for a year. Multiplying the daily cost is valid only while usage stays constant, which is a reasonable first approximation and a poor one across seasons.
Common Questions
How does the Electricity Cost Calculator work?
A 1500 W appliance used three hours a day consumes 4.5 kWh, which at 0.28 per kWh costs 1.26 a day, 0.42 an hour, 37.8 across a thirty-day month and 459.9 across a year. The division by 1000 turns watts into kilowatts, because the price is quoted per kilowatt-hour and a kilowatt is a thousand watts. For a 100 W bulb left on ten hours the same method gives 1 kWh and 0.28 — a fifteenth of the power and a fifteenth of the cost.
What do I need to enter in the Electricity Cost Calculator?
It takes 3 inputs: Power rating in watts, Hours used per day, Price per kilowatt-hour. Fields that expect a unit say so next to the label.
Where does Cost per day come from?
It comes from kWh = watts x hours / 1000 — turn a power rating and a duration into the energy the meter records. The division by 1000 converts watts into kilowatts.
What is the most common mistake with the Electricity Cost Calculator?
Treating watts as the energy consumed per hour. A watt is a rate, not a quantity. A 1500 W appliance does not use 1500 units an hour; it uses 1.5 kWh an hour. Confusing power with energy is the root of most bad estimates, and it survives because both numbers look plausible.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Electricity Cost page.
