CCalclabhub

Science · 51 calculators

Force Calculator

Force is mass times acceleration, but the numbers only make sense once mass and weight are kept apart. A 1200 kilogram car needs 3600 newtons to accelerate at 3 metres per second squared, yet it weighs 11767.98 newtons because gravity is pulling on it constantly.

Last updated

Net force in newtons

3,600

Weight in newtons, from W = m x g
11,767.98
Acceleration expressed in g
0.3059
The same force in pounds-force
809.3122

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

F = m x a

F
Force in newtons, the net push or pull that changes motion
m
Mass in kilograms, the amount of matter and a measure of inertia
a
Acceleration in metres per second squared, the rate of change of velocity
W
Weight in newtons, equal to m x g, the force gravity exerts
g
Standard acceleration due to gravity, 9.80665 metres per second squared

How to check the result by hand

  1. 1

    Put every quantity into SI units first

    Mass belongs in kilograms and acceleration in metres per second squared. A 1200 kilogram car at 3 metres per second squared is already in the right form, so no conversion is needed before the multiplication.

  2. 2

    Multiply mass by acceleration for the net force

    1200 x 3 = 3600, so the net force is 3600 newtons. This is the force that actually changes the car's speed, not the force the engine produces, which must also overcome friction and drag.

  3. 3

    Compute the weight separately with W = m x g

    Weight is a different question and a different formula: 1200 x 9.80665 = 11767.98 newtons. Keeping the two calculations apart stops the weight from being mistaken for the force needed to accelerate.

  4. 4

    Check the direction and subtract opposing forces

    The second law uses the net force, so any friction or drag acting against the motion is subtracted. If 1000 N opposes the car, the engine must supply 4600 N to leave 3600 N of net force.

  5. 5

    Sanity-check against the weight and convert if needed

    The 3600 N of net force is only 0.30591486389337846 of the car's 11767.98 N weight, which is exactly 3 m/s^2 divided by 9.80665. Converting to imperial units, 3600 N is 809.3121951589578 pounds-force.

Common Questions

How does the Force Calculator work?

Multiply the mass in kilograms by the acceleration in metres per second squared. A 1200 kilogram car accelerating at 3 metres per second squared needs 1200 x 3 = 3600 newtons of net force. Its weight is a different calculation: mass times the acceleration due to gravity, 1200 x 9.80665 = 11767.98 newtons. The acceleration itself, divided by standard gravity, is 3 / 9.80665 = 0.30591486389337846 g, and the 3600 newtons convert to 809.3121951589578 pounds-force. Keeping weight and the force needed to accelerate clearly separate is the whole trick.

What do I need to enter in the Force Calculator?

It takes 2 inputs: Mass in kilograms, Acceleration in metres per second squared. Fields that expect a unit say so next to the label.

Where does Net force in newtons come from?

It comes from F = m a — the core relation. Multiply mass by acceleration to get the net force. Both inputs must be in SI units, kilograms and metres per second squared, for the answer to appear in newtons.

What is the most common mistake with the Force Calculator?

Confusing mass with weight. Mass is measured in kilograms and weight in newtons. A 1200 kilogram car has a weight of 11767.98 N, not 1200 N, and reporting the mass as a force gives an answer that is wrong by a factor of g.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Force page.