CCalclabhub

Everyday Life · 57 calculators

Household Water Usage Calculator

Household water use is dominated by a small number of fixtures. Measure showers, toilets and laundry and you have captured most of what goes through the meter indoors, without needing to read the bill and guess.

Last updated

Daily household use

97.2571

Per person per day
32.419
Showers per day
50.4
Toilets per day
24
Annual household use
35,498.84

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

Daily gallons = shower use + toilet use + laundry use

G
Total household water use in gallons per day
m
Shower minutes per person per day
f
Shower flow rate in gallons per minute

How to check the result by hand

  1. 1

    Measure the shower, do not trust the rating

    Time a shower and check the head's flow. The rating on the box assumes a standard pressure and a new fitting; an older head on a high pressure supply can run well above it. A bucket and a stopwatch give the real figure in under a minute.

  2. 2

    Count flushes and check flush volume

    Five flushes per person per day is a normal assumption. For the volume, look for a stamp inside the tank or the bowl. Anything installed before the early nineties is likely to be 3.5 gallons or more.

  3. 3

    Convert laundry to a daily figure

    Loads per week times gallons per load, then divide by seven. Skipping the division is the single most common mistake here, and it overstates laundry sevenfold.

  4. 4

    Add the three lines

    The sum is the household's daily indoor use. Divide by the number of people to get the per person figure, which is the one worth comparing against published benchmarks.

  5. 5

    Check it against the bill

    Convert the bill to gallons first, since many utilities charge by the hundred cubic feet or the cubic metre. If the metered figure is far higher than the estimate, look for outdoor use or a leak.

Common Questions

How does the Household Water Usage Calculator work?

Work out each fixture separately and add them. Three people with 8 minute showers at 2.1 gallons per minute use 50.4 gallons on showers, 24 on toilets and 22.8571 on laundry, for 97.2571 gallons a day.

What do I need to enter in the Household Water Usage Calculator?

It takes 7 inputs: People in the household, Shower minutes per person per day, Shower flow rate, Toilet flushes per person per day, Gallons per flush, Laundry loads per week, Gallons per laundry load. Fields that expect a unit say so next to the label.

Where does Daily household use come from?

It comes from Gs = m x f x n — minutes per person, times flow rate, times the number of people.

What is the most common mistake with the Household Water Usage Calculator?

Using the shower head's rated flow instead of the measured flow, when ratings assume a new fitting at standard pressure and real installations often run higher.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Household Water Usage page.