Science · 51 calculators
Impulse Calculator
Impulse explains why a long soft stop hurts less than a short hard one: the same change in momentum, delivered over more time, needs far less force.
Last updated
Impulse
100
- Velocity change
- 50
- Acceleration
- 100
- Kinetic energy gained
- 2,500
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
impulse = force x time
- J
- Impulse, in newton seconds
- F
- Force applied, in newtons
- t
- Time the force acts, in seconds
How to check the result by hand
- 1
Identify the force and how long it acts
Both matter equally. A large force applied for a tiny fraction of a second can deliver less impulse than a modest force held for a while.
- 2
Convert the time to seconds
Milliseconds divide by a thousand. Collisions are often quoted in milliseconds, and forgetting that conversion makes the impulse a thousand times too large.
- 3
Multiply force by time
Two hundred newtons for half a second is one hundred newton seconds. This is the total momentum change the object will experience.
- 4
Divide by the mass to get the velocity change
One hundred newton seconds on a two kilogram object changes its speed by fifty metres per second. Heavier objects change velocity less for the same impulse.
- 5
Check the direction of the change
A rebound reverses momentum, so the change is the sum of the incoming and outgoing amounts, not their difference. Bouncing off a wall delivers a larger impulse than sticking to it.
Common Questions
How does the Impulse Calculator work?
Multiply the force by how long it acts. Two hundred newtons applied for half a second gives an impulse of one hundred newton seconds, which on a two kilogram object changes its velocity by fifty metres per second.
What do I need to enter in the Impulse Calculator?
It takes 3 inputs: Force, Contact time, Object mass. Fields that expect a unit say so next to the label.
Where does Impulse come from?
It comes from J = F x t — force in newtons times the duration in seconds. The result is in newton seconds.
What is the most common mistake with the Impulse Calculator?
Leaving the time in milliseconds. The formula needs seconds. A contact time of twenty milliseconds is 0.02, and using twenty directly inflates the impulse by a factor of a thousand.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Impulse page.
