CCalclabhub

Everyday Life · 57 calculators

Mulch Needed Calculator

Working out mulch is a volume problem. Multiply the bed area by the depth you plan to spread, then convert that volume into the bags or yards the supplier actually sells.

Last updated

Mulch needed in cubic feet

50

Bags to buy
25
Equivalent in cubic yards
1.8519
Total cost
150

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

cubic feet = length x width x (depth in inches / 12)

L, W
The length and width of the bed, in feet
d
The depth of mulch, in inches
V
The volume of mulch needed, in cubic feet
B
The number of bags, rounded up to whole bags

How to check the result by hand

  1. 1

    Measure the bed

    Length times width gives the area in square feet. A 20 by 10 foot bed is 200 square feet.

  2. 2

    Convert the depth to feet

    Three inches divided by twelve is 0.25 feet. Forgetting this step multiplies the answer by twelve.

  3. 3

    Multiply area by depth

    200 times 0.25 is 50 cubic feet, which is the volume of mulch the job needs.

  4. 4

    Divide by the bag size

    Fifty cubic feet in bags of two is 25 bags exactly. Any remainder rounds up, because part bags are not sold.

  5. 5

    Check the bulk equivalent

    Fifty cubic feet is 1.85 cubic yards, so a bulk order of two yards is the one that covers the job.

Common Questions

How does the Mulch Needed Calculator work?

Multiply the length by the width to get the area, then by the depth in feet. A 20 by 10 foot bed at 3 inches deep is 50 cubic feet, which is 25 bags of 2 cubic feet or 1.85 cubic yards. Buying a single bag short of the requirement leaves an obvious thin patch.

What do I need to enter in the Mulch Needed Calculator?

It takes 5 inputs: Bed length, Bed width, Mulch depth, Bag size, Price per bag. Fields that expect a unit say so next to the label.

Where does Mulch needed in cubic feet come from?

It comes from cubic feet = length x width x depth in feet — the volume of mulch needed for a rectangular bed.

What is the most common mistake with the Mulch Needed Calculator?

Multiplying by the depth in inches. The area is in square feet, so the depth must be in feet too. Three inches is 0.25 feet, and using 3 directly overstates the order by a factor of twelve.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Mulch Needed page.