CCalclabhub

Everyday Life · 57 calculators

Paint Coverage Calculator

Paint coverage is quoted per litre per coat, so the coat count multiplies the area before you divide. The arithmetic is one multiplication and one division; the judgement lies in reading the coverage figure honestly and turning litres into tins you can actually buy.

Last updated

Litres of paint needed

20

Total area including coats
240
Five-litre tins required
4
Ten-litre tins required
2

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

Litres needed = (wall area x coats) / coverage per litre

A
Wall area to be painted, in square metres
c
Number of coats, usually two
R
Coverage per litre per coat, as printed on the tin
S
Tin size, commonly 5 litres or 10 litres

How to check the result by hand

  1. 1

    Measure the total paintable area

    Multiply each wall's length by its height and add the rooms together. A 5 m by 4 m room with a 2.5 m ceiling gives an 18 m perimeter times 2.5 m, or 45 m2; four such rooms give 180 m2. Subtract only large openings such as windows and doors.

  2. 2

    Multiply by the number of coats

    Two coats on 120 m2 of wall give 240 m2 of painted surface. The coat count is the multiplier that comes first, before any division, because coverage is always quoted for a single coat.

  3. 3

    Divide by the coverage per litre

    240 m2 divided by 12 m2 per litre gives 20.0 litres. Keep the coverage figure for the actual product and surface, since a porous first coat can drop the effective rate well below the tin's headline number.

  4. 4

    Convert litres into whole tins

    20.0 litres is 4.0 five-litre tins or 2.0 ten-litre tins. Tins are fixed sizes, so round up to the next whole tin and accept the surplus rather than planning around a fractional tin that does not exist.

  5. 5

    Add a margin for touch-ups and porosity

    Round the purchase up rather than down: 25.0 litres covers the same 120 m2 with room for a third coat on a stubborn patch, and opened paint rarely keeps well enough to be relied on for repairs months later.

Common Questions

How does the Paint Coverage Calculator work?

Multiply the wall area by the number of coats, then divide by the coverage per litre. For 120 m2 of wall, two coats and 12 m2 per litre, the total painted area is 240 m2 and the paint required is 20.0 litres. Because tins come in fixed sizes, that is 4.0 five-litre tins or 2.0 ten-litre tins, and the answer is a floor rather than a final purchase: porous surfaces, drastic colour changes and awkward trim all push the real figure upward.

What do I need to enter in the Paint Coverage Calculator?

It takes 3 inputs: Wall area to paint (square metres), Number of coats, Coverage per litre (square metres per litre). Fields that expect a unit say so next to the label.

Where does Litres of paint needed come from?

It comes from Total area = wall area x number of coats — coverage is quoted per coat, so the surface is multiplied by the coat count before any division happens.

What is the most common mistake with the Paint Coverage Calculator?

Dividing by coverage before multiplying by the coats. Taking 120 m2 straight to 10.0 litres forgets the second coat and under-buys by half. The coat count multiplies the area first: 120 m2 becomes 240 m2, and 240 m2 divided by 12 m2 per litre gives the correct 20.0 litres.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Paint Coverage page.