CCalclabhub

Math · 61 calculators

Percent Increase Calculator

Percent increase is a gap divided by where you started. Get the denominator right and the rest is arithmetic; get it wrong and every figure downstream is quietly answering a different question.

Last updated

Percent increase

25.00%

Absolute increase
20
New value as a multiple of the original
1.25
The same gap divided by the new value (the wrong way round)
20.00%

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

Percent Increase = (New Value - Original Value) / Original Value x 100

V0
Original value — where you began, and the divisor
Vn
New value — where you ended up
Vn - V0
Absolute increase, before conversion to a rate
Vn / V0
Growth multiple — 1.25 is the same fact as +25%

How to check the result by hand

  1. 1

    Confirm that the movement really is upward

    Percent increase assumes the new value exceeds the original. When it does not, the arithmetic still works but the sign comes out negative and what you are describing is a decrease. From 80 to 100 the direction is upward, the gap is 20, and the answer has to be positive.

  2. 2

    Subtract to get the absolute increase

    New minus original, always in that order. For 80 rising to 100 that is 20, and this figure is worth keeping separate from the percentage: it is the size of the change before any comparison has been made, and it is the number you should quote when the base is tiny or zero.

  3. 3

    Divide by the original value, not the new one

    This is the step where errors happen, because both numbers are sitting there looking plausible. Divide the 20 by 80, the starting figure, giving 0.25. Dividing by 100 instead gives 0.20 and answers the reverse question — how far you would have to fall to get back.

  4. 4

    Multiply by 100 and attach the unit

    0.25 x 100 = 25.00%. Writing the direction alongside the number matters, because a bare 25 is easily read further downstream as a quantity rather than as a rate. Round once, here, to a precision the inputs can support.

  5. 5

    Verify by multiplying back

    Multiply the original by one plus the decimal form of the increase: 80 x 1.25 = 100. If the product does not return the new value, then either the denominator or the decimal conversion was wrong, and the check tells you so before anyone reads the number.

Common Questions

How does the Percent Increase Calculator work?

Subtract the original from the new value, divide by the original, then multiply by 100. From 80 to 100 the increase is 20, and 20 divided by 80 is 0.25, giving 25.00%. The reverse move, from 100 down to 80, is only a 20.00% decrease, because the same 20 is then measured against 100 — the two directions never match. The new value is also 1.25 times the original, which is the same fact written as a multiple. Two successive rises of 10% do not total 20.00%; they compound to 1.1 x 1.1 = 1.21, a single increase of 21.00%.

What do I need to enter in the Percent Increase Calculator?

It takes 2 inputs: Original value, New value. Fields that expect a unit say so next to the label.

Where does Percent increase come from?

It comes from % Increase = (New - Original) / Original x 100 — the increase divided by the starting value, scaled to a percentage. The original is always the divisor, whatever else the problem offers you.

What is the most common mistake with the Percent Increase Calculator?

Dividing by the new value instead of the original. It produces the reversal of the change rather than the change itself. The gap of 20 read against 100 is 20.00%, while read against 80 it is 25.00%, and only the second answers the question asked. The result still looks reasonable, which is precisely why it survives review.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Percent Increase page.