Science · 51 calculators
PH Calculator
pH is the negative base ten logarithm of the hydrogen ion concentration. That single logarithm is why a hundredfold change in concentration moves the scale by only two units.
Last updated
pH
3
- pOH
- 11
- Hydroxide concentration in picomoles per litre
- 10
- Dilution factor
- 0.1
- pH after dilution
- 4
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
pH = -log10[H+]
- H+
- Hydrogen ion concentration in moles per litre
- pH
- Negative base ten logarithm of that concentration
- pOH
- 14 minus the pH at 25 degrees Celsius
- OH-
- Hydroxide ion concentration, equal to 10 to the minus pOH
How to check the result by hand
- 1
Write the concentration in moles per litre
The formula expects a molar concentration, not grams per litre or a percentage. Convert first if necessary, because the logarithm of a wrongly scaled number is simply wrong rather than obviously wrong.
- 2
Take the base ten logarithm
The logarithm of 0.001 is minus 3. Concentrations below one always produce a negative logarithm, which is exactly why the definition includes a minus sign in front.
- 3
Change the sign to get pH
Minus 3 becomes a pH of 3. If the answer comes out negative, the concentration was larger than one mole per litre, which is possible for very strong concentrated acids.
- 4
Subtract from 14 for the pOH
A pH of 3 leaves a pOH of 11. This step is free and gives a useful cross-check, because the two values must always add to 14 at room temperature.
- 5
Apply the dilution ratio when volumes change
Multiply the concentration by the sample volume divided by the total volume, then take the logarithm again. Each tenfold dilution adds one whole unit to the pH, so the shift is easy to sanity-check.
Common Questions
How does the PH Calculator work?
A hydrogen ion concentration of 0.001 moles per litre gives a pH of 3, because the base ten logarithm of 0.001 is minus 3 and the negative of that is 3. The pOH is then 11 and the hydroxide concentration is 10 picomoles per litre, which is the same as 1e-11 moles per litre. Diluting the solution tenfold drops the concentration to 0.0001 and raises the pH to 4.
What do I need to enter in the PH Calculator?
It takes 3 inputs: Hydrogen ion concentration in mol/L, Sample volume in litres, Water added in litres. Fields that expect a unit say so next to the label.
Where does pH come from?
It comes from pH = -log10[H+] — the definition. Take the base ten logarithm of the concentration in moles per litre and change its sign, which turns small negative logarithms into the familiar positive pH scale.
What is the most common mistake with the PH Calculator?
Forgetting the minus sign. The definition includes a minus sign precisely because concentrations below one produce negative logarithms. Dropping it gives minus 3 where the pH should be 3, and the sign error is easy to miss in a column of numbers.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate pH page.
