Everyday Life · 57 calculators
Recipe Calculator
Scaling a recipe is one division followed by a great many multiplications. The division is trivial; knowing which ingredients should not be multiplied at all is the actual skill.
Last updated
Scale factor
1.5
- The ingredient at the new scale
- 375
- Amount per single serving
- 62.5
- The same ingredient for twelve servings
- 750
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Scale factor = desired servings / original servings, then new amount = original amount x factor
- desired
- Servings you want to end up with
- original
- Servings the recipe as written makes
- factor
- Unitless ratio, desired divided by original
- amount
- The quantity of one ingredient, before or after scaling
How to check the result by hand
- 1
Write down the two serving counts
Find the number of servings the recipe makes and the number you want, and put them in the right order. Four and six in the standard example. Swapping them inverts the factor, turning 1.5 into 0.6667 and shrinking a recipe you meant to enlarge.
- 2
Divide to get the scale factor
Desired divided by original: 6 / 4 = 1.5. A factor above one enlarges the recipe, below one shrinks it, and exactly one leaves it alone. This single number now governs every line that follows, so it is worth confirming before you touch the ingredients.
- 3
Multiply every proportional ingredient by the factor
250 g becomes 250 x 1.5 = 375 g, and the same multiplication runs down the whole list. The amount per serving should stay fixed at 62.5 g, which is your running check on each line. Work in one unit system throughout, because mixing cups with grams introduces an error the factor cannot see.
- 4
Trim the ingredients that are not linear
Leaveners, salt, strong spices, eggs and alcohol do not want the full factor. Add leaveners at roughly three-quarters of the increase, season to taste at the very end, and weigh beaten egg for the awkward fractions. This step is judgement rather than arithmetic, and it is where most scaled recipes go wrong.
- 5
Match the pan by area and set the time by observation
If the tin changes, scale by the ratio of the squared diameters, so moving from 8 inches to 10 inches means 1.5625 rather than 1.25. Keep the stated oven temperature and judge doneness by eye and texture, because time lengthens by a fraction of the factor rather than by all of it.
Common Questions
How does the Recipe Calculator work?
Divide the servings you want by the servings the recipe makes to get a single scale factor, then multiply every ingredient by it. A recipe written for four servings cooked for six gives 6 / 4 = 1.5, so 250 g of an ingredient becomes 250 x 1.5 = 375 g, and the amount per serving stays at 62.5 g. Twelve servings would need 250 x 3 = 750 g. The multiplication is reliable for flour, butter, milk and meat, but leaveners, salt, spices, eggs, alcohol, pan sizes and cooking times do not follow the factor, and each has to be handled on its own terms.
What do I need to enter in the Recipe Calculator?
It takes 3 inputs: Servings the recipe makes, Servings you want, Amount of one ingredient. Fields that expect a unit say so next to the label.
Where does Scale factor come from?
It comes from factor = desired servings / original servings — the single ratio that drives everything else. A recipe for four scaled to six gives 6 / 4 = 1.5.
What is the most common mistake with the Recipe Calculator?
Scaling baking powder or yeast by the full factor. Doubling the batter does not double the structure that has to hold the gas, so twice the leavener tastes soapy or metallic and the centre sinks after it rises. Use roughly three-quarters of the increase instead, and err on the low side, because under-leavened is a texture problem while over-leavened is a flavour one.
For worked examples, common mistakes and the limits of this formula, read the full How To Scale A Recipe page.
