CCalclabhub

Math · 61 calculators

Perimeter Of A Rectangle Calculator

Perimeter is the fence, the skirting and the picture frame: the distance around the edge, which is always a plain length rather than a square measure.

Last updated

Perimeter

26

Half sum (length + width)
13
Area
40
Diagonal
9.434

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

perimeter = 2 x (length + width)

P
Perimeter, the total distance around the edge
l
Length of the longer side
w
Width of the shorter side, in the same unit

How to check the result by hand

  1. 1

    Measure one long side and one short side

    You only need two measurements, not four. Opposite sides of a rectangle are equal by definition, so the other two are already known.

  2. 2

    Convert both to the same unit

    Addition is unforgiving about units. Two metres plus thirty centimetres has to become two metres plus 0.3 metres, or two hundred centimetres plus thirty centimetres, before anything else happens.

  3. 3

    Add the length and the width

    Eight plus five is thirteen. This half sum is the distance along one long side and one short side, a quarter of the way round.

  4. 4

    Double the half sum

    Two times thirteen is twenty six metres. Doubling at the end is safer than doubling each side first, because there is only one multiplication to get right.

  5. 5

    Check against the area

    The area of the same rectangle is forty square metres. A perimeter larger than the area in the same unit is not an error by itself, but a perimeter in square units certainly is.

Common Questions

How does the Perimeter Of A Rectangle Calculator work?

Add the length and the width, then double the result. An eight by five metre room has a perimeter of 26 metres. Equivalently, add all four sides, but doubling the half sum is faster and leaves less room for error.

What do I need to enter in the Perimeter Of A Rectangle Calculator?

It takes 2 inputs: Length, Width. Fields that expect a unit say so next to the label.

Where does Perimeter come from?

It comes from P = 2 x (l + w) — add the two different sides, then double. Equivalent to adding all four sides individually.

What is the most common mistake with the Perimeter Of A Rectangle Calculator?

Doubling before adding. Twice the length plus twice the width is correct, but doubling only one of them is not. The safest order is to add first and double second, which makes the error impossible.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Perimeter Of A Rectangle page.