Everyday Life · 57 calculators
Solar Panels Needed Calculator
Sizing a solar array is a division problem. Work out how much energy one panel produces where you live, then divide your daily consumption by that number.
Last updated
Panels needed
20
- System size
- 8
- Daily output per panel
- 1.548
- Annual output
- 11,300.4
- Share of usage covered
- 103.20%
- Roof area needed
- 430
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
panels = ceil(daily kWh / (panel kW x peak sun hours x (1 - losses)))
- daily kWh
- Your average electricity use per day
- peak sun hours
- The equivalent hours of full strength sun per day
- panel kW
- The rated output of one panel, watts divided by 1000
- losses
- Everything lost to wiring, heat, dirt and the inverter
How to check the result by hand
- 1
Find your daily electricity use
Read the annual total off your bill and divide by 365. A home using 10950 kWh a year uses 30 kWh a day, which is the number the array has to cover.
- 2
Work out what one panel produces
A 400 watt panel is 0.4 kilowatts. At 4.5 peak sun hours with 14 percent system losses it delivers 0.4 times 4.5 times 0.86, which is 1.548 kWh a day.
- 3
Divide and round up
Thirty divided by 1.548 is 19.38 panels, so 20 go on the roof. Rounding up matters because a short array leaves you buying grid power at the worst tariff.
- 4
Check the roof and the coverage
Twenty panels at 21.5 square feet each need about 430 square feet, and the array produces 11300.4 kWh a year, which is 103.2 percent of the 10950 kWh the home uses.
Common Questions
How does the Solar Panels Needed Calculator work?
A 400 watt panel in a place with 4.5 peak sun hours and 14 percent system losses produces 1.548 kWh a day. A home using 30 kWh a day therefore needs 20 panels, which is an 8 kW system covering about 430 square feet.
What do I need to enter in the Solar Panels Needed Calculator?
It takes 5 inputs: Daily electricity use, Peak sun hours per day, Panel rating, System losses (percent), Area of one panel. Fields that expect a unit say so next to the label.
Where does Panels needed come from?
It comes from daily kWh = (watts / 1000) x peak sun hours x (1 - losses) — the rated output, scaled by the local sun and reduced by real world losses.
What is the most common mistake with the Solar Panels Needed Calculator?
Treating the panel rating as real output. A 400 watt panel rarely delivers 400 watts on a roof. Heat alone costs several percent, and the rating assumes a cool panel in laboratory light.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Solar Panels Needed page.
