CCalclabhub

Science · 51 calculators

Spring Force Calculator

Stretch a spring and it pushes back in proportion to how far you stretched it. That single sentence is Hooke's law, and it is the reason springs appear in suspension, in scales, in mattresses and in the shock absorbers that keep a door from slamming. The force is easy to compute; the subtlety is knowing how far the linear rule actually holds.

Last updated

Spring force

30

Stored energy
1.8
Angular frequency
12.9099
Oscillation period
0.4867

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

F = -k x

k
Spring constant in newtons per metre
x
Displacement from the natural length in metres
m
Mass hung on the spring in kilograms

How to check the result by hand

  1. 1

    Measure the displacement from the natural length

    Record how far the spring is stretched or compressed away from the length it settles at with nothing attached. Take this in the same unit you want the answer in; metres is the convenient choice because the spring constant is quoted per metre.

  2. 2

    Read or measure the spring constant

    Take k from the manufacturer's datasheet, or find it by hanging a known mass and dividing the weight by the extension. Newtons per metre is the standard unit; a car coilover is in the tens of thousands, a pen spring in the single digits.

  3. 3

    Multiply to get the force

    Restoring force equals k times displacement. A 250 newton per metre spring pulled 0.12 metres gives 30 newtons. If the spring is compressed rather than stretched, the magnitude is identical and only the direction flips.

  4. 4

    Compute the stored energy

    Energy equals one half times k times the displacement squared. For the numbers above that is 0.5 x 250 x 0.12 x 0.12, or 1.8 joules, which is the work you did stretching it.

  5. 5

    Find the oscillation period if a mass is attached

    Period equals two pi times the square root of mass over k. With 1.5 kilograms on the 250 newton per metre spring the period is about 0.487 seconds, so the mass completes roughly two cycles per second.

Common Questions

How does the Spring Force Calculator work?

Spring force is the spring constant times the displacement from the natural length. A 250 newton per metre spring stretched 0.12 metres pulls back with 30 newtons, holds 1.8 joules, and with 1.5 kilograms attached oscillates every 0.487 seconds.

What do I need to enter in the Spring Force Calculator?

It takes 3 inputs: Spring constant, Displacement, Attached mass. Fields that expect a unit say so next to the label.

Where does Spring force come from?

It comes from F = -k x — the restoring force is the spring constant times the displacement from the natural length, directed back toward equilibrium.

What is the most common mistake with the Spring Force Calculator?

Measuring from the wrong reference. Displacement is the change from the spring's natural length, not the absolute position of its end. A spring already preloaded 40 millimetres and then compressed another 10 has a displacement of 50 millimetres and three times the force of the additional travel alone.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate A Spring Force page.