CCalclabhub

Math · 61 calculators

System Of Linear Equations Calculator

Two equations with two unknowns have a single solution whenever the two lines cross at exactly one point, and Cramer's rule finds that point with nothing more than determinants.

Last updated

Value of x

2

Value of y
3
Determinant of the coefficients
-14
First equation with the solved values
13

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

D = a1 b2 - a2 b1

a1, b1, c1
The coefficients and constant of the first equation
a2, b2, c2
The coefficients and constant of the second equation
D
The determinant of the coefficient matrix
x, y
The values that satisfy both equations at once

How to check the result by hand

  1. 1

    Write both equations in standard form

    Each equation must read ax + by = c, with the unknowns on the left in that order and the constant alone on the right. Rearranging first prevents coefficients from being read off in the wrong order.

  2. 2

    Build the determinant from the coefficients

    Multiply the first x coefficient by the second y coefficient and subtract the second x coefficient times the first y coefficient. For 2x + 3y = 13 and 4x - y = 5 that is 2 times -1 minus 4 times 3, giving -14.

  3. 3

    Check that the determinant is not zero

    A zero determinant means the lines are parallel or identical, so there is no single solution. Comparing the ratio of the x coefficients with the ratio of the y coefficients reveals the parallel case before any division is attempted.

  4. 4

    Replace the x column with the constants

    Keep the y coefficients where they are and put the two constants in the x column. The numerator is c1 b2 minus c2 b1, which for the example is -28, and dividing by -14 gives x = 2.

  5. 5

    Replace the y column and check the answer

    Swap the constants into the y column for a numerator of a1 c2 minus a2 c1, giving y = 3. Substitute both values back into the original equations; each must return its stated constant.

Common Questions

How does the System Of Linear Equations Calculator work?

Put both equations in the form ax + by = c, then build the determinant from the four coefficients. For 2x + 3y = 13 and 4x - y = 5 the determinant is -14, which gives x = 2 and y = 3. Substituting those values back into the first equation returns 13, confirming the solution.

What do I need to enter in the System Of Linear Equations Calculator?

It takes 6 inputs: First equation: coefficient of x, First equation: coefficient of y, First equation: constant on the right, Second equation: coefficient of x, Second equation: coefficient of y, Second equation: constant on the right. Fields that expect a unit say so next to the label.

Where does Value of x come from?

It comes from D = a1 b2 - a2 b1 — built from the four coefficients that multiply the unknowns. It appears in the denominator of both solutions, so it must be non-zero for a unique answer to exist.

What is the most common mistake with the System Of Linear Equations Calculator?

Dividing by a zero determinant. When the determinant is zero the two lines are parallel or identical, so there is no single solution to report. Dividing anyway produces a pair of numbers that satisfies neither equation, and nothing on the page flags them as meaningless.

For worked examples, common mistakes and the limits of this formula, read the full How To Solve A System Of Linear Equations page.