CCalclabhub

Science · 51 calculators

Total Resistance Calculator

Total resistance is the single resistor that behaves exactly like a whole network. Series connections add, parallel connections combine reciprocally, and mixing the two is where most mistakes happen.

Last updated

Total resistance

600

If wired in series
600
If wired in parallel
54.5455
Current drawn
0.02
Power dissipated
0.24

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

Series: R = R1 + R2 + R3. Parallel: 1/R = 1/R1 + 1/R2 + 1/R3

R
The total or equivalent resistance, in ohms
R1, R2, R3
The individual resistances, in ohms
I
Current, in amperes, found from Ohm's law

How to check the result by hand

  1. 1

    Identify how the resistors are connected

    Trace the current path. If it passes through every resistor one after another they are in series; if each one connects the same two nodes they are in parallel.

  2. 2

    Add for series

    100 plus 200 plus 300 is 600 ohms. The total is always larger than the largest individual resistor, which is the quick check.

  3. 3

    Add reciprocals for parallel

    1/100 plus 1/200 plus 1/300 is 0.01 plus 0.005 plus 0.003333, which is 0.018333. Taking the reciprocal gives 54.5455 ohms.

  4. 4

    Apply Ohm's law to the equivalent

    With 12 volts across 600 ohms the current is 12 divided by 600, which is 0.02 amperes. The same current would flow through a single 600 ohm resistor.

Common Questions

How does the Total Resistance Calculator work?

In series the resistances simply add, because the same current has to push through each one in turn. In parallel the reciprocals add, so three resistors of 100, 200 and 300 ohms give 600 ohms in series but 54.5455 ohms in parallel.

What do I need to enter in the Total Resistance Calculator?

It takes 5 inputs: Connection, Resistor 1, Resistor 2, Resistor 3, Supply voltage. Fields that expect a unit say so next to the label.

Where does Total resistance come from?

It comes from R = R1 + R2 + R3 — series resistances add directly because the same current flows through each one.

What is the most common mistake with the Total Resistance Calculator?

Adding resistors in parallel. Parallel resistors do not add. Adding 100, 200 and 300 gives 600 ohms when the correct answer is 54.5455 ohms, an error of more than eleven times.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Total Resistance page.