Math · 61 calculators
Area Of A Triangle Calculator
A triangle covers exactly half of whatever parallelogram shares its base and height. Nearly every wrong answer comes from one of two slips: a height that was never perpendicular, or a base and a height borrowed from two different sides.
Last updated
Area of the triangle
30
- Perimeter from the three sides
- 24
- Semi-perimeter used by Heron's formula
- 12
- Area from the three sides alone
- 26.8328
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Area = 1/2 x base x height
- base
- Any one side of the triangle, chosen by you
- height
- Perpendicular distance from that base to the opposite corner
- a, b, c
- The three side lengths, used when no height is known
- s
- Semi-perimeter, equal to (a + b + c) / 2
- A
- Enclosed area, always in square units
How to check the result by hand
- 1
Choose a base and stay with it
Any of the three sides works and the area does not depend on which you pick. In a triangle with sides of 7, 8 and 9, taking 8 as the base is convenient because the height to it is 6.70820393.
- 2
Measure the perpendicular height to that base
Shortest distance from the base's line to the opposite corner, at a right angle. With a base of 10 and a slanted side of 7, the true height of 6 is the one to use; the slanted side would give 35 instead of 30.
- 3
Multiply the two lengths, then halve
10 x 6 = 60, and half of that is 30. Halving last keeps the intermediate figure comparable with the parallelogram the triangle sits inside.
- 4
If you only have the sides, switch to Heron's formula
Add the three sides and halve to get s, subtract each side from s, multiply the four values and take the root. For 7, 8 and 9: s = 12, the product is 720, the area is 26.83281573 and the perimeter is 24.
- 5
Attach square units and round once
A base and height in metres give square metres. If the inputs were measured to the nearest unit, quoting 26.83281573 overstates what was known; 26.8 or 27 is the honest figure.
Common Questions
How does the Area Of A Triangle Calculator work?
Multiply the base by the perpendicular height that belongs to it, then halve the product: a base of 10 with a height of 6 gives 0.5 x 10 x 6 = 30. When all you have is the three sides, use Heron's formula instead: sides of 7, 8 and 9 give a semi-perimeter of 12, an area of sqrt(12 x 5 x 4 x 3) = sqrt(720) = 26.83281573 and a perimeter of 24, and the height that pairs with the side of length 8 is 2 x 26.83281573 / 8 = 6.70820393. Either route lands in square units, because two lengths have been multiplied together.
What do I need to enter in the Area Of A Triangle Calculator?
It takes 6 inputs: Base, Height to that base, Side A, Side B, Side C, What you know. Fields that expect a unit say so next to the label.
Where does Area of the triangle come from?
It comes from A = 1/2 x base x height — the standard form. Multiply the two lengths first and halve afterwards, so the intermediate figure can be compared with the bounding parallelogram.
What is the most common mistake with the Area Of A Triangle Calculator?
Using a slanted side as if it were the height. A slanted side is always longer than the perpendicular distance it spans. With a base of 10, a true height of 6, and a slanted side of 7, substituting 7 gives 35 where the answer is 30 — a plausible-looking figure that no triangle of those dimensions can have.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Area Of A Triangle page.
