Electronics
Resistivity from a measurement
Scales the measured resistance by the geometry of the sample.
Last updated
The Formula
rho = R x A / L
Scales the measured resistance by the geometry of the sample.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| rho | Resistivity | ohm metres | The material property. |
| R | Resistance | ohms | The resistance measured across the sample. |
| A | Cross sectional area | square metres | The area the current flows through. |
| L | Length | metres | The length over which resistance was measured. |
What Each Symbol Means
rhoohm metres
Resistivity
The material property.
Rohms
Resistance
The resistance measured across the sample.
Asquare metres
Cross sectional area
The area the current flows through.
Lmetres
Length
The length over which resistance was measured.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate resistivity page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate Resistivity, filed under Science. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Resistivity from a measurement?
The formula for Resistivity from a measurement is rho = R x A / L. Scales the measured resistance by the geometry of the sample.
What does each symbol in Resistivity from a measurement stand for?
rho is resistivity; R is resistance; A is cross sectional area; L is length.
What units should I use with Resistivity from a measurement?
Substitute rho in ohm metres, R in ohms, A in square metres, L in metres. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Resistivity from a measurement?
Leaving the cross section in square millimetres. It must be in square metres, which means dividing by a million, and forgetting gives an answer a million times too large.