CCalclabhub

Science · 51 calculations

Mechanics

How To Calculate Angular Velocity

Angular velocity measures how fast something turns: the rate at which its angle changes with time. It links the count of revolutions per second to the radians swept out each second, and it turns a rotation rate into the linear speed of any point on the rotating body. This page sets out the conversion, the related period and rpm figures, and the mistakes that most often distort the answer.

Last updated

Quick Answer

ω = 2πf

ω
Angular velocity in radians per second
f
Rotational frequency in hertz
r
Distance from the axis of rotation

Multiply the rotational frequency in hertz by two pi to obtain angular velocity in radians per second. Multiplying that result by the radius gives the tangential speed at that radius, while the reciprocal of frequency gives the period and multiplying by sixty gives revolutions per minute. At two hertz and a radius of half a metre, the angular velocity is about 12.57 radians per second.

What Is Angular Velocity?

Angular velocity describes how quickly the angular position of an object changes with time. Where ordinary speed measures distance travelled per second, angular velocity measures angle swept per second, and its standard unit is the radian per second. One complete turn covers two pi radians, so an object turning once per second has an angular velocity of two pi radians per second. Angular velocity also has a direction: by convention it points along the axis of rotation according to the right-hand rule. Treating it purely as a positive number is fine for many calculations, but the direction matters whenever rotations combine.

The connection to rotational frequency is short and exact. Frequency counts complete revolutions per second, and each revolution contains two pi radians. Multiplying the number of revolutions by the radians in one revolution therefore gives the angular distance covered each second. That is why omega equals two pi times frequency. The factor of two pi is not a correction or a conversion for special cases; it is simply the number of radians in a full circle, and it appears in every problem of this kind.

Radians are used because they make the geometry of circles behave cleanly. An angle in radians is defined as arc length divided by radius, which means one radian is the angle subtended when the arc length equals the radius. With angles measured this way, the distance travelled along a circular path is just radius times angle, with no extra constant. Degrees are convenient for drawing but awkward in calculation, because every formula acquires a factor of one hundred and eighty over pi. Converting to radians at the start keeps the algebra simple and the units consistent.

Tangential speed is the linear speed of a point on the rotating body, and it is found by multiplying angular velocity by the radius. Two points on the same spinning disc share one angular velocity, yet the point near the rim travels much farther each second than the point near the hub. That is why the rim has the higher tangential speed even though the whole disc turns as one piece. The relationship also runs backwards: dividing a measured tangential speed by the radius recovers the angular velocity. Keeping the two quantities distinct prevents a great deal of confusion about units.

The period of a rotation is the time taken for one complete turn and is the reciprocal of frequency. An object turning twice each second has a period of half a second. Because angular velocity equals two pi times frequency, the period can equally be written as two pi divided by angular velocity. A high angular velocity always means a short period, and doubling the rate halves the time per turn. This reciprocal link is the same one used for waves, where frequency and period trade off against each other.

Revolutions per minute is the unit most often quoted for engines, fans and hard drives. It is a frequency measured in turns per sixty seconds rather than turns per second, so converting it to hertz means dividing by sixty. From there the usual factor of two pi gives radians per second. A rate of one hundred and twenty revolutions per minute is two revolutions per second, which corresponds to an angular velocity of roughly 12.57 radians per second. Getting the direction of the sixty conversion right is the most common source of a factor-of-sixty error.

Angular velocity is properly a vector, and its sign carries meaning. Using the right-hand rule, curl the fingers of your right hand in the direction of rotation and your thumb points along the angular velocity vector. A wheel spinning in the opposite direction has the opposite sign, which is essential when adding rotations or analysing gyroscopes. In two-dimensional problems it is often enough to record clockwise or anticlockwise and keep the magnitudes positive, but the underlying quantity remains directional.

The formulas here assume a steady rate of rotation. If the body speeds up or slows down, the angular velocity changes with time and an angular acceleration must be introduced to describe the change. Even at constant angular velocity, a point on the rim is accelerating, because the direction of its velocity changes continuously as it goes round. The corresponding centripetal acceleration equals angular velocity squared times the radius. Recognising that constant angular velocity does not mean zero acceleration clears up a common conceptual stumbling block.

These ideas appear wherever rotation matters. Motor specifications quote revolutions per minute, gear designers work with angular velocity ratios, and flywheel energy depends on the square of the angular velocity. Orbital mechanics uses the same relationship to connect an orbital period with an angular rate. The same chain also underpins gear design, where meshing wheels share a tangential speed at their contact point while their angular velocities differ in inverse proportion to their radii. In each case the chain from frequency to angular velocity to tangential speed is the same, which is why getting comfortable with two pi and the radius is such a useful investment.

Formula

Each revolution contains two pi radians, so multiplying the revolutions per second by two pi gives the radians swept per second. This is the primary conversion and uses pi to fifteen decimal places in the calculator.

SymbolMeaning
ωAngular velocity
fRotational frequency

A point at radius r travels an arc of length r times the swept angle each second. Substituting angular velocity for the swept angle per second gives its linear speed along the circular path.

SymbolMeaning
vTangential speed
ωAngular velocity
rRadius

T = 1 / f, N = 60f

Formula page →

Period is the reciprocal of frequency and gives seconds per revolution. Multiplying frequency by sixty expresses the same rate as revolutions per minute.

SymbolMeaning
TPeriod
fRotational frequency
NRevolutions per minute

How To Calculate Angular Velocity

  1. 1

    Put the frequency in hertz

    Start with the number of complete revolutions per second. If the figure is quoted in revolutions per minute, divide it by sixty; two hundred and forty rpm becomes four hertz. If it is already in hertz, leave it alone. This is the only input that needs converting before the main multiplication.

  2. 2

    Multiply by two pi for angular velocity

    Compute omega = 2 x pi x f, using 3.141592653589793 for pi. With a frequency of two hertz the result is 12.566370614359172 radians per second. This step converts a count of turns into a measure of swept angle and is the heart of the calculation.

  3. 3

    Multiply by radius for tangential speed

    Take the point whose speed you want and multiply the angular velocity by its distance from the axis. At a radius of half a metre, 12.566370614359172 radians per second gives 6.283185307179586 metres per second. Points nearer the axis move more slowly even though the rotation rate is identical.

  4. 4

    Find the period and the rpm figure

    Take the reciprocal of frequency for the period, so two hertz gives 0.5 seconds per revolution. Multiply frequency by sixty to express the rate as revolutions per minute, giving one hundred and twenty rpm. These two numbers describe the same rotation from the time and the engineering viewpoints.

  5. 5

    Cross-check the relationships

    Multiply the angular velocity by the period and you should recover two pi, because one revolution sweeps that angle. Likewise, dividing the tangential speed by the radius should return the angular velocity. These checks catch a stray factor of sixty or a forgotten two pi before the numbers are used.

Examples

Example 1: Two turns per second at a radius of half a metre

frequency
2
radius
0.5
StepCalculationResult
Frequencygiven rate2 hertz
Radius from the axisgiven radius0.5 metres
Period1 / 20.5 seconds
Revolutions per minute2 x 60120.0 rpm
Tangential speed12.566370614359172 x 0.56.283185307179586 metres per second
Angular velocity2 x 3.141592653589793 x 212.566370614359172 radians per second

Result: The angular velocity is 12.566370614359172 radians per second. At the stated radius the tangential speed is 6.283185307179586 metres per second, with a period of 0.5 seconds and a rate of 120.0 rpm.

Example 2: One turn per second at a radius of half a metre

frequency
1
radius
0.5
StepCalculationResult
Frequencygiven rate1 hertz
Radius from the axisgiven radius0.5 metres
Period1 / 11 second
Revolutions per minute1 x 6060.0 rpm
Tangential speed6.283185307179586 x 0.53.141592653589793 metres per second
Angular velocity2 x 3.141592653589793 x 16.283185307179586 radians per second

Result: The angular velocity is 6.283185307179586 radians per second, exactly half the two hertz case. The tangential speed falls to 3.141592653589793 metres per second, the period is 1 second and the rate is 60.0 rpm.

Example 3: Three turns per second at a radius of a quarter metre

frequency
3
radius
0.25
StepCalculationResult
Frequencygiven rate3 hertz
Radius from the axisgiven radius0.25 metres
Period1 / 30.3333333333333333 seconds
Revolutions per minute3 x 60180.0 rpm
Tangential speed18.84955592153876 x 0.254.71238898038469 metres per second
Angular velocity2 x 3.141592653589793 x 318.84955592153876 radians per second

Result: The angular velocity is 18.84955592153876 radians per second. At a radius of a quarter metre the tangential speed is 4.71238898038469 metres per second, the period is 0.3333333333333333 seconds and the rate is 180.0 rpm.

Calculator

Angular velocity

12.5664

Tangential speed
6.2832
Period
0.5
Revolutions per minute
120

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the Angular Velocity calculator page.

Common Mistakes

  • Using frequency as angular velocity

    Reporting two hertz as two radians per second omits the factor of two pi and understates the rate by more than six times. Always multiply revolutions per second by two pi before calling the result angular velocity.

  • Forgetting to divide rpm by sixty

    Revolutions per minute must become revolutions per second before the two pi conversion. Multiplying rather than dividing, or leaving the sixty out altogether, produces an answer wrong by a factor of sixty or three thousand six hundred.

  • Mixing up angular and tangential speed

    Angular velocity is measured in radians per second and is the same for every point on a rigid body, while tangential speed is in metres per second and depends on radius. Confusing the two leads to comparing unlike quantities.

  • Entering angles in degrees

    The formula assume radians. An angle of one hundred and eighty degrees is pi radians, not one hundred and eighty radians. Convert degrees first, or the resulting speeds will be wildly oversized.

  • Using the wrong radius

    Tangential speed uses the distance of the chosen point from the axis, not the diameter and not the thickness of the object. Centimetres must also be converted to metres, or the linear speed will be a hundred times too large.

  • Assuming constant angular velocity means no acceleration

    A point moving in a circle is accelerating even at a steady rotation rate, because the direction of its velocity keeps changing. The centripetal acceleration is angular velocity squared times radius, and it must not be ignored in force calculations.

FAQ

What unit is angular velocity measured in?

The SI unit is the radian per second. Radians are dimensionless in a strict sense, so the unit is sometimes written simply as per second, but keeping the word radian makes it clear that the quantity is an angular rate rather than a count of revolutions.

How do I convert revolutions per minute to radians per second?

Divide the rpm value by sixty to get revolutions per second, then multiply by two pi. One hundred and twenty rpm becomes two hertz, which becomes about 12.57 radians per second. Combining the steps, multiply rpm by pi and divide by thirty.

Why do I multiply frequency by two pi?

Because one revolution sweeps an angle of two pi radians. Frequency tells you how many revolutions happen each second, so multiplying by the radians per revolution converts a count of turns into the angle covered per second.

What is the difference between angular and linear velocity?

Angular velocity measures how fast the angle changes and is shared by the whole rotating body. Linear or tangential velocity measures how fast a particular point travels along its circular path and grows with distance from the axis. They are linked by the radius.

Does angular velocity depend on where I measure it?

No. Every point on a rigid rotating body completes the same angle in the same time, so the angular velocity is identical throughout. What changes with position is the tangential speed, which is larger farther from the axis.

How does angular velocity relate to centripetal force?

The centripetal acceleration of a point on a rotating body equals angular velocity squared times its radius. Multiplying by the mass gives the required centripetal force, which is why faster rotation demands disproportionately more strength in a spinning component.

References

  1. [1]Wikipedia, Angular velocity — https://en.wikipedia.org/wiki/Angular_velocity
  2. [2]Wikipedia, Radian — https://en.wikipedia.org/wiki/Radian
  3. [3]Wikipedia, Rotational speed — https://en.wikipedia.org/wiki/Rotational_speed