CCalclabhub

Science · 51 calculators

Angular Velocity Calculator

Angular velocity measures how fast something turns: the rate at which its angle changes with time. It links the count of revolutions per second to the radians swept out each second, and it turns a rotation rate into the linear speed of any point on the rotating body. This page sets out the conversion, the related period and rpm figures, and the mistakes that most often distort the answer.

Last updated

Angular velocity

12.5664

Tangential speed
6.2832
Period
0.5
Revolutions per minute
120

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

ω = 2πf

ω
Angular velocity in radians per second
f
Rotational frequency in hertz
r
Distance from the axis of rotation

How to check the result by hand

  1. 1

    Put the frequency in hertz

    Start with the number of complete revolutions per second. If the figure is quoted in revolutions per minute, divide it by sixty; two hundred and forty rpm becomes four hertz. If it is already in hertz, leave it alone. This is the only input that needs converting before the main multiplication.

  2. 2

    Multiply by two pi for angular velocity

    Compute omega = 2 x pi x f, using 3.141592653589793 for pi. With a frequency of two hertz the result is 12.566370614359172 radians per second. This step converts a count of turns into a measure of swept angle and is the heart of the calculation.

  3. 3

    Multiply by radius for tangential speed

    Take the point whose speed you want and multiply the angular velocity by its distance from the axis. At a radius of half a metre, 12.566370614359172 radians per second gives 6.283185307179586 metres per second. Points nearer the axis move more slowly even though the rotation rate is identical.

  4. 4

    Find the period and the rpm figure

    Take the reciprocal of frequency for the period, so two hertz gives 0.5 seconds per revolution. Multiply frequency by sixty to express the rate as revolutions per minute, giving one hundred and twenty rpm. These two numbers describe the same rotation from the time and the engineering viewpoints.

  5. 5

    Cross-check the relationships

    Multiply the angular velocity by the period and you should recover two pi, because one revolution sweeps that angle. Likewise, dividing the tangential speed by the radius should return the angular velocity. These checks catch a stray factor of sixty or a forgotten two pi before the numbers are used.

Common Questions

How does the Angular Velocity Calculator work?

Multiply the rotational frequency in hertz by two pi to obtain angular velocity in radians per second. Multiplying that result by the radius gives the tangential speed at that radius, while the reciprocal of frequency gives the period and multiplying by sixty gives revolutions per minute. At two hertz and a radius of half a metre, the angular velocity is about 12.57 radians per second.

What do I need to enter in the Angular Velocity Calculator?

It takes 2 inputs: Rotational frequency (Hz), Radius (m). Fields that expect a unit say so next to the label.

Where does Angular velocity come from?

It comes from ω = 2πf — each revolution contains two pi radians, so multiplying the revolutions per second by two pi gives the radians swept per second. This is the primary conversion and uses pi to fifteen decimal places in the calculator.

What is the most common mistake with the Angular Velocity Calculator?

Using frequency as angular velocity. Reporting two hertz as two radians per second omits the factor of two pi and understates the rate by more than six times. Always multiply revolutions per second by two pi before calling the result angular velocity.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Angular Velocity page.