Math · 61 calculators
Area Of A Rhombus Calculator
The area of a rhombus is half the product of its two diagonals, a shortcut that works because those diagonals cross at right angles. This page shows why that formula holds, how the same diagonals give you the side length and perimeter through Pythagoras, and how to apply the numbers in three worked examples.
Last updated
Area
40
- Perimeter
- 25.6125
- Side length
- 6.4031
- Diagonal product
- 80
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
A = (d1 × d2) / 2
- d1
- The full length of the first diagonal, measured from one corner to the opposite corner
- d2
- The full length of the second diagonal, measured between the other pair of corners
- A
- The area enclosed by the rhombus, in square units
- s
- The length of any one of the four equal sides
How to check the result by hand
- 1
Measure the two full diagonals
Identify the corner-to-corner distances d1 and d2, not the distances from a corner to the centre where the diagonals cross. In the worked case these are 10 and 8. Check that both are in the same units before doing anything else, since a mixture of centimetres and millimetres will scale the final area incorrectly by a factor of ten or a hundred.
- 2
Multiply the diagonals to get their product
Compute d1 times d2. With 10 and 8 the product is 80. This number is twice the area, so if you accidentally stop here you will be reporting the area of a rectangle that encloses the rhombus four times over. Keeping the product visible makes the next step trivial to audit.
- 3
Halve the product for the area
Divide the product by two: 80 divided by 2 gives an area of 40 square units. The divisor two comes from the right-angled triangles formed by the crossing diagonals, and it applies for every rhombus regardless of its angles. Doubling either diagonal would double the product and therefore double this area.
- 4
Halve each diagonal and apply Pythagoras
For the side length, take half of each diagonal, giving 5 and 4 in the example. These are the legs of a right triangle whose hypotenuse is a side of the rhombus. Square and add them to get 25 plus 16 equal to 41, then take the square root to obtain a side of 6.4031242374328485.
- 5
Multiply the side by four for the perimeter
All four sides are equal, so the perimeter is four times the side just found. Four times 6.4031242374328485 is 25.612496949731394 units. Notice the perimeter carries ordinary length units while the area carries square units, so the two numbers describe different things and should never be compared directly.
Common Questions
How does the Area Of A Rhombus Calculator work?
Multiply the full length of one diagonal by the full length of the other, then divide by two. With diagonals of 10 and 8 the product is 80 and the area is 40 square units. Halving each diagonal first gives legs of 5 and 4, so the side is the square root of 41, or 6.4031242374328485, and the perimeter is four times that, 25.612496949731394.
What do I need to enter in the Area Of A Rhombus Calculator?
It takes 2 inputs: First diagonal, Second diagonal. Fields that expect a unit say so next to the label.
Where does Area come from?
It comes from A = (d1 × d2) / 2 — multiply the full diagonals together and halve the result. The halving accounts for the four right-angled triangles into which the perpendicular diagonals divide the shape, and it is what distinguishes this from the area of a rectangle with the same spans.
What is the most common mistake with the Area Of A Rhombus Calculator?
Using the half-diagonals in the area formula. The area formula takes the full corner-to-corner diagonals. Substituting the halves, 5 and 4 in the worked case, gives half the correct area because both factors have been divided by two. Reserve the halves for the Pythagoras step that finds the side.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Area Of A Rhombus page.
