Home
Area of the surface to be covered
Length times width, with both measurements in one consistent unit. Subtract permanent obstructions only if they will never be tiled behind.
Last updated
The Formula
A = L x W
Length times width, with both measurements in one consistent unit. Subtract permanent obstructions only if they will never be tiled behind.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| L | Room length | length | One side of the floor or wall, in metres. It is 4 in the worked example. |
| W | Room width | length | The perpendicular side, in the same unit. It is 3 in the worked example. |
| A | Area to be covered | square units | 4 x 3 = 12 square metres for the worked room. |
What Each Symbol Means
Llength
Room length
One side of the floor or wall, in metres. It is 4 in the worked example.
Wlength
Room width
The perpendicular side, in the same unit. It is 3 in the worked example.
Asquare units
Area to be covered
4 x 3 = 12 square metres for the worked room.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate tile count page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate Tile Count, filed under Everyday Life. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Area of the surface to be covered?
The formula for Area of the surface to be covered is A = L x W. Length times width, with both measurements in one consistent unit. Subtract permanent obstructions only if they will never be tiled behind.
What units should I use with Area of the surface to be covered?
Substitute L in length, W in length, A in square units. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Area of the surface to be covered?
Forgetting the wastage allowance entirely. The exact division gives 133.33333333333334 tiles, and ordering that many ignores every cut and breakage. Add at least ten percent, which here means 146.66666666666669 tiles and a rounded order of 147. A job ordered to the exact area figure almost always runs short near the end, when the offcut tiles are the ones being used.