CCalclabhub

Home

Litres of paint required

Dividing the total painted area by the per-litre coverage gives the volume of paint, before any rounding to tins.

Last updated

The Formula

Litres = (wall area x coats) / coverage per litre

Dividing the total painted area by the per-litre coverage gives the volume of paint, before any rounding to tins.

SymbolMeaning
RCoverage per litre per coat
A x cTotal painted area
LLitres of paint needed

What Each Symbol Means

Rsquare metres per litre

Coverage per litre per coat

Quoted on the tin, typically 12 m2 per litre for emulsion on smooth walls.

A x csquare metres

Total painted area

The wall area already multiplied by the number of coats.

Llitres

Litres of paint needed

A continuous volume, which the shop then rounds up to whole tins.

See It Worked With Real Numbers

A formula on its own does not tell you which number goes where. The how to calculate paint coverage page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.

Where This Formula Appears

This equation is the working core of How To Calculate Paint Coverage, filed under Everyday Life. Every number the guide produces comes from substituting into this one line.

Common Questions

What is the formula for Litres of paint required?

The formula for Litres of paint required is Litres = (wall area x coats) / coverage per litre. Dividing the total painted area by the per-litre coverage gives the volume of paint, before any rounding to tins.

What does each symbol in Litres of paint required stand for?

R is coverage per litre per coat; A x c is total painted area; L is litres of paint needed.

What units should I use with Litres of paint required?

Substitute R in square metres per litre, A x c in square metres, L in litres. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.

What is a common mistake when using Litres of paint required?

Treating the tin's coverage figure as fixed. The 12 m2 per litre on the label assumes a smooth, sealed surface. Bare plaster or rough render may cover only 9 m2 per litre, which turns the same 240 m2 into 26.6666667 litres and can leave a wall half-finished with no matching batch left to buy.